Air Conditioning 


Timber Dryers 


Military Equipment 



Product Data

  Part Number Part Number
  11580RG-US 11580RH-US
  HM150 HM150-H
Height (inch) 18.5 18.5
Width (inch) 18.3 18.3
Depth (inch) 26.8 26.8
Weight(lbs) 95 95
Voltage 110 110
Phase 1 1
Frequency(Hz) 60 60
Power(kW) 0.85 0.85
Current(A) 8 8
Airflow(cfm) 540 540
Noise Level(dba) 60 60
Refrigerant Type R407c R407c
Effective Volume(ft3) 10,600 10,600
Typical Extraction(ppd) 105 105
Maximum Extraction(ppd) 203 203
Min Operating Temp (°F) 33 33
Max OperatingTemp (°F) 90 90
  Part Number Part Number
  11580RG-US 11580RH-US
  HM150 HM150-H
On/Off Switch Y Y
Electronic Humidity Control N Y
Recirculation Mode N Y
Status Indicators Y Y
Pump Purge Switch Y Y
Reverse Cycle Defrost Y Y
Electronic Defrost Timer Y Y
Temperature Sensative Defrost Y Y
Washable Air Filter Y Y
Compressor Type Rotary Rotary
Fitted GFI Plug Y Y
High Impact Wheels Y Y
Integral Condensate Pump Y Y
Rotational Moulded Body Y Y
Ductable Y Y
Collapsible Handle Y Y
Part Number Description Qty Qty
11580RG-US Dehumidifier 1  
TPC597 Manual 1  
11580RH-US Dehumidifier   1
TPC602 Manual   1
Part Number Description
None None
  Part Number Part Number
  11580RG-US 11580RH-US
HM150 HM150-H
Wiring Diagram
Wiring Schematic
Spare Parts List


EIPL are a recognized world wide supplier of flood restoration drying equipment. We offer a variety of dehumidifiers and air movers to remove water and assist with drying areas after water damage. Following a flood, whether it is in your basement or office, it’s vitally important to restore the damaged area to good order as soon as possible to protect your health from microorganisms, mold and bacteria that may grow and ultimately prevent further damage. Whether it is a flash flood, heavy rains or water main break, EIPL have the equipment to handle the harshest environments and assist with proper restoration

Key Design Features

The Rotationally Moulded body with integral handles ensures the unit can easily be lifted into the trunk of your vehicle. The collapsible handle and durable wheels ensure the unit can easily be positioned on job sites. Plug and Play operation couldn't be simpler, place the hose in a drain point, connect the unit to a suitable power source and switch on. The HM150-H has the additional benefit of in built Humidity Control, allowing for precise control and a digital readout of the Humidity levels

EIPL Rotamoulded Range

​​The HM150 & HM150-H Dehumidifiers are another addition to the EIPL range of Rotational Moulded Polyethylene Housings. This super durable housing, and EIPL’s years of experience with refrigeration systems, ensures the product not only looks the part, but is also capable of outperforming competitors models of similar capacities. The robust ridged collapsible handle and durable wheels ensures transport and manoeuvrability are not compromised. It’s lightweight yet robust design is ideal for commercial work. Its compact size permits one-man operation, yet it has the capacity to handle several room-size areas at a time. Best of all, it’s affordably priced within the budget of most restoration specialists. The HM150 housing also incorporates a facility to safely stack units, thereby significantly reducing storage and transportation costs. ​The HM150-H, has a built in humidity controller allowing a precise humidity level to be entered, and continuous readout of the actual room humidity level.

Save Time And Money

No more worries of forgetting to empty buckets, due to customer requirement the HM150 range incorporate an integral condensate pumps. The 3m maximum pump height will ensure no installation is too difficult. Install, connect to a permanent drain, and forget until the job is complete. With the aid of a purge facility, all residual water can be drained from the pump tank prior to moving the machine therefore eliminating the chances of spillage. ​

Low Temperature Operation

The HM150 is equipped with a “Reverse Cycle” defrost system, ensuring a quick and efficient clearing of ice from the coil, allowing a minimum operating temperature of 3°C.

Attention To Detail

Sometimes the less expensive features are overlooked. The HM150 is supplied complete with cable and hose tidies, Not only will this reduce the possibility of damage when the units are transported, but also provides easy installation when positioning the equipment.

Proven Performance

The EIPL HM150 Professional Dehumidifier is a rugged, yet mobile piece of equipment that will operate under extreme conditions pulling large amounts of moisture from the air. Whenever there is a need for fast dependable, energy efficient drying, EIPL can provide the answer. The high efficiency Rotary compressor ensures the maximum extraction with the lowest running costs.