Air Conditioning 


Timber Dryers 


Military Equipment 



Product Data

  Part Number
  10650GR-US 10651GR-US
  DD1200-HE DD1200-HE
Height (inch) 63 63
Width (inch) 80 80
Depth (inch) 34 34
Weight(lbs) 463 463
Voltage 220 460
Phase 3 3
Frequency(Hz) 60 60
Power(kW) 11.8 11.8
Current(A) 31 15
Process Airflow(cfm) 705 705
Regen Airflow(cfm) 195 195
Process Duct Size (inch) 12.0 120
Regen Duct Size (inch) 12.0 12.0
Noise Level(dba) 67 67
Typical Extraction(ppd) 562 562
Min Operating Temp (°F) -4 -4
Max OperatingTemp (°F) 104 104
  Part Number
  10650GR-US 10651GR-US
  DD1200-HE DD1200-HE
PLC Touch Screen Control Y Y
Man/Auto Mode Selection Y Y
Remote Humidity Sensor Facility Y Y
High Temperature Safety Cut-outs Y Y
EC High Efficency Fans Y Y
Variable Fan Speeds Y Y
High Capacity PTC Heaters Y Y
Inbuilt-Post Cooler Module Y Y
Inbuilt-Pre Heat Module Y Y
Free Standing Y Y
Self Contained Y Y
Stainless Steel Construnction O O
Part Number Description Qty
10650GR-US Dehumidifier 1
TPC Manual 1
-------- ------------------ ----
10651GR-US Dehumidifier 1
TPC Manual 1
Part Number Description
3035157 Mechanical Humidistat - Internal Sensor
3035160 Electronic Humidistat - Internal Sensor
3035162 Electronic Humidistat - External Sensor
  Part Number
  10650GR-US 10651GR-US
DD1200-HE DD1200-HE
Wiring Diagram
Wiring Schematic
Spare Parts List


Dehumidifiers are required wherever there is a need to lower the humidity level to prevent corrosion, mold growth and condensation or maintain a low humidity condition during manufacture, packaging or storing of hygroscopic products.

Methods Of Dehumidification

Dehumidification is possible using two possible principles, Condensation with refrigeration style dehumidifiers and Adsorption with desiccant dehumidifiers. Desiccant dehumidifiers perform exceptionally well when used in cooler climates, or when a low dew-point, deep drying or low humidity levels are required. Since desiccant dehumidifiers do not produce water, they will work effectively down to sub zero temperatures. Their operation is simplistic yet extremely effective and reliable. Air (Process Air) is drawn into the dehumidifier, where is passes over a wheel impregnated with Silica Gel. As the air passes over this wheel, any moisture present in the air is absorbed into the Silica Gel wheel before leaving the dehumidifier as warm dry air. The Silica Gel wheel is continually, slowly rotating, typically at three revolutions per hour. As the wheel rotates, a small portion passes through the regeneration segment. During this phase a second air stream (Regeneration Air) is heated to a high temperature before passing over the wheel. Any moisture present in the wheel is released into this air stream; this hot wet air is then exhausted outside the area being dried.

Why Choose EIPL

EIPL is Europe’s leading manufacturer of dehumidifiers and is a name you can rely on. No matter how extreme the conditions EIPL’s efficiency copes comfortably even at the coldest temperatures.

Rugged Construction & Years Of Service

Over forty years of development experience means you can rely on the proven track record of the EIP range of dehumidifiers. Every dehumidifier is designed for efficiency and ruggedness, and built to last. The popularity of EIP Ltd’s dehumidifiers with the plant hire trade speaks for their reliability, portability and outstanding durability.


The DD1200-HE is an extension to the standard DD1200 range, The “HE” versions offers the user a totally PLC based control system with touch screen. This unit has the same extraction as the regular DD1200 or DD1200+, however has inbuilt energy saving features. The Regen Pre-Heating cycle utilises the heat from the Regeneration Air (which would normally be exhausted outside) to Pre-heat the incoming air, thereby reducing the overall power consumption. The Post Cooling cycle uses the external ambient air to cool the normally warm, dry, return air before i renters the space being conditioned. This reduces the loading on the room air conditioning system, and consequently reduced the overall power consumption of the facility The ​three​ EC fans with variable speed allowing the unit to be easily installed, and commissioned in a wide variety of installations. Temperature control via the PLC, allows the user to select the desired drying level ie, high efficiency drying, deep drying, or high extraction. The EIP range of DD desiccant dehumidifiers are all manufactured from an epoxy powder coated steel (stainless steel versions also available), ensuring a rust free product when used in the most severe of applications. The spigot connectors allow quick and easy installation. All models incorporate a high efficiency patented PPS Rotor. This design incorporates an 82% active Silica Gel to ensure optimum performance over the equipment’s wide operating range of environments. All desiccant rotors supplied by EIPL are washable, and designed for high performance / long life.