Dehumdifiers 

 

Timber Dryers 

 

Military Equipment 

 

AD850E

Product Data

  Part Number
  1028020
  AD850E
Height (inch) 29.5
Width (inch) 26.0
Depth (inch) 13.5
Weight(lbs) 86
Voltage 110
Phase 1
Frequency(Hz) 60
Power(kW) 0.88
Current(A) 7
Airflow(cfm) 294
Noise Level(dba) 50
Effective Volume(ft3) 8,369
Typical Extraction(ppd) 56
Min Operating Temp (°F) 41
Max OperatingTemp (°F) 95
  Part Number
  1028020
  AD850E
On/Off Switch Y
Status Indicators Y
Fan Speeds 2
Electronic Defrost Timer Y
Temperature Sensative Defrost Y
Compressor Type Rotary
Adjustable Humdistat Y
Condensate Pump Y
Refrigerant Type R407c
Filter Y
Centrifugal Fan Y
Quiet Operation Y
Moulded Mains Plug Y
Galvanised Steel Chassis Y
Part Number Description Qty
1028020 Dehumidifier 1
Wall mounting bracket 1
Rubber buffers 1
3086144 Quick release hose coupling 1
TPC382 Manual 1
Part Number Description
None None
  Part Number
  1028020
AD850E
Brochure
Manual
Wiring Diagram
Wiring Schematic
Spare Parts List

Application

The EIPL AD850E dehumidifier is an ideal solution for humidity control in a wide variety of applications including offices, apartments, stores, restaurants, bars, salons, museums, storerooms, computer and telecommunications rooms, garages, cellars and animal enclosures. Its also great for spa rooms in homes or hotels / motels.

Key Design Features

Streamlined modern design to blend in with different decors and environments, Cross flow blower style fan for quite operation, Built in electronic humidistat allows accurate humidity readings, Two speed fan motor to adapt to environmental conditions for optimal performance, Electronic, temperature sensitive defrost to allow operation down to 41°F (5°C), Two removable washable air filters Integral condensate pump, High efficiency rotary compressor

Operation

The effective answer to excessive humidity is a dehumidifier. Rated at 50 decibels, the AD850E is quiet enough to have in your home, yet strong enough to combat adverse moisture problems. The AD850E is a high capacity dehumidifier made to operate at high efficiencies by removing moisture from the air through the refrigeration process. The fan draws the moist air through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray, which is equipped with an internal condensate pump for easy removal of collected moisture. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the AD850E at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the AD850E gradually reduces the relative humidity within the area. Because the AD850E is equipped with an internal humidistat, it automatically switches on and off to save energy and expense by maintaining the desired level of humidity with intermittent operation.